This 10 x 18 x 3 Vacuumed Formed Reusable NO SEAL FORMS designed with the DIY’er and Weekend Warrior in mind, they are very affordable for someone just starting off in the epoxy world.
These Forms are made with a single piece of 1/4” HDPE making it very flexible (sides may not perfectly straight when unboxed, can be straighten out by hand) the sides are 3" high and never require sealant.
These vacuumed forms don’t require any sealant or tuck tape.
Your project is easily removed by tapping the sides and back with a mallet. Once removed, you can start another immediately
Please use rubber mallet to tap your cured project out of the form by gently hitting the inside of the sides and flipping over and hitting the bottom. Using excessive force inside on the sides and using a metal hammer will void any warranty.
Please read carefully instructions on how to mix and pour your Epoxy.
Epoxy that does not cure properly will make it impossible to remove your project.
Epoxy that overheats during the curing process will twist and crack the Form, sometimes adhering to the form. Again, making it very difficult to remove your project for the form.
Mold release is not needed but will not hurt if used
Wood Clamps and blocks not included